WS cut・squeegee

Squeegee cut to best shape for silver paste coating.

In order to get the best printing result, other than base ink and stencil, squeegee condition is very important.

「WS cut」 with grinding finishing is the ideal shape for squeegee.

Product features

■About shape
During high resolution printing with high viscoelasticity printing paste or ink, or high-definition circuit printing which needs uniform coating, squeegee needs enough force at the same time quick shearing force in order to do uniform printing.

WScut・squeegee

※Remain attachment angle as 70°, reduce angle of attack.

 

■About squeegee
1. Reduce actual angle of attack and increase 「filling force」(about45~50°)
2. To maintain uniformity, keep rubber leg long in order to keep 「Elasticity」.
3. Right angle grinding of squeegee tip has advantage on smooth scratching of ink paste on plate.

Observation of result using high viscoelasticity silver paste for SUS500 50μm line printing

silver paste printing result 1

Normal flat type attack angle set as 70°

silver paste printing result 2

WS cut・squeegee actual attack angle set as 50°

 
 

 

■about product

Rubber type MP(Good printability and solvent-resistance),
ME(for strong solvent-resistance use), 
MU(Good abrasion resistance and anti-elasticity), etc.
Support MINO original product, flat squeegee with high hardness.
Modified length order cutting for 500mm and 750mm.

Item is modified for MINO orginal holder clamp product use .
for use of other holder, please process adjustment (finishing grinding) if needed.

※Other shape and angle can also be modify, please contact us for further detail.

Similar product

<

>

CUSTOMER SERVICE CENTER

"Do you have this product?" "Can this type of ink be manufacture?" "How to print on this location?" Please feel free to contact us, MINO GROUP for any inquiry.

MINO INTERNATIONAL LTD.

+81-3-3577-1621

Office Hour 9:00〜12:00/13:00〜17:00
(Monday to Friday, excluding National holiday)

]