■Features
Feeder
●After taking feeder to carry out secure film separation
●Ion blower to remove static electricity
●Independent drive ensure reliable material feeding
●2 sheets feed detection sensor work well for transparent thin film.
●Work static elimination, dust removing cleaning device dust
Printer
●Max. 550×650mm, min. 300×350mm, various substrate from frame thickness over 75μm to board thickness 2.5mm.
●Perfect alignment with MINO Image Processing”MlP”
●High speed printing max. 720 sheet/ hour
●Digital setting, registration of printing data
●One side operation
●Large frame size to stabilize image dimension
■Space saving machine size
■Specification
| Max. material size | 550×650mm |
|---|---|
| Max. printing area | 540×650mm |
| Min. material size | 300×350mm |
| Max. material thickness | 2.5mm |
| Max. material weight | 1.0kg |
| Squeegee drive | AC servo motor |
| Squeegee speed | 20-500mm/sec |
| Printing pressure | with low printing pressure unit |
| Squeegee stroke | Numeric input |
| Squeegee lifting | 50mm |
| Diagonal squeegee | ±3° |
| rain mark prevention | ink wipper (PAT) |
| Frame micro adjustment range | ±8mm |
| Frame micro adjustment method | motor drive |
| Clearance | Numeric input |
| Peel-off | Numeric input |
| Frame lifting | 400mm |
| Gripper margin | 4mm |
| Operation panel | Hybrid operation panel with touch panel and button |
| CCD camera for alignment | 2 units |
| Target area | within 20-100mm from material tip |
| Location registration target recommended mark | φ1mm 2 locations |
| Frame location registration camera | 2 units |
| Frame matching target recommended mark | φ3mm 2 locations |
| Image processing | Please refer to MINO Image Processing 「MIP」 |
| Electricity | 3phase AC200V 50A |
| Air souce | 0.4MPa |
| Air consumption | 5L/cycle |
| Machine size(including feeder) | 1800mm(W)×3880mm(L)×1670mm(H) |
| Machine weight | Approx. 2000kg |
